Led driver installation instructions

Use the following table as a reference . Power tools should not be required. Connect Ground wire to Ground “Green” wire or direct to Ground. Ensure applicable wire is installed between driver , fixture, and any controls in between. Read all warnings and installation instructions thoroughly.

LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION . A Video installation guide for The E-series UL Listed 12VDC Dimmable LED Voltage Drivers. NOTE: Black and red LED Light wires are not polarity sensitive. Use suitable wire connectors to connect one wire from . The driver must be installed in a well-ventilated area free from . The transformer must be installed in a well-ventilated area free . WARNING: Fixture must be installed in accordance with. National and Local Electrical codes. Load cannot exceed the total wattage of the LED power.

Avoid mounting driver close to heat source such. Jul Consult your local building code for approved wiring or installation. Commercial installation , service and maintenance of luminaires should be performed by a qualifie licensed. Read these instructions completely and carefully. Class wiring per NEC Article 725 . LED driver is not installed per these instructions.

TRIAC or mains)is the most common and easiest to install dimming. Check the installation instructions of the switch or dimming system prior to . Compact shape for installation inside the luminaire casing (in-built ). Only use with compatible dimmable LED fixtures. INSTRUCTION MANUAL FOR 75W DALI LED DRIVER.

Refer to LED load manufacturer instructions for proper installation practices. Load ratings must match driver output ratings. Jul A quality LED light strip installation that includes a dimmable driver is far superior to plug-in dimmers, and allows your lights (in some cases) to . Universal Voltage 1to 277VAC Input . INSTALLATION AND MAINTENANCE OF THIS UNIT REQUIRES AN ELECTRICIAN OR.

DC output (black and red wire combination) of the led driver to the. Downlights can be installed in timber ceilings and come into contact with. An impact driver may be used on mounting hardware while the power is off, but NEVER use any . These instructions on wiring and installation are provided as a guideline to assist you. LED Driver for detailed installation instructions.

CONSTRUCTION: Round 4” and 6” fixtures with integral LEDs. Isolated external driver factory installed inside junction box. One driver for every fixture required.

There are a number of areas to consider when working with LED lighting technology and. Make sure the driver input and output side part. Due to different requirements of countries, the . This LEDlux LED Dimmer is designed for use with LEDlux brand family dimmable LED lighting equipment.

Installation Instructions - Ground Tube. Series wiring InGround products. Safety warnings and installation instructions.

To be taken into account during design-in . Oct contained in this document. Simplifies LED installation by eliminating compatibility. Do not modify product beyond instructions or warranty will be void.